Home » Archive for October 2009

Increase Downloading Speed of utorrent

Now a days utorrent/torrent is one of the most recommended application for downloading big size files with resumable capability...

Boosting the downloading speed is not only intention of post but to solve one of the crucial stage where you all readers are normally get stuck to download file but your downloader is in lacking of seeders, and you seems to be in waiting for long time.

So here is hack for this problem, the following steps are mainly optimized for dial-up and broadband...

1. First open utorrent go to Options->Preferences->Network

2. Under ‘Port used for incoming connections’, enter any port number.
Usually it should be above 10000....I am using 24389.

3. Look for 'Randomize port each start' uncheck this option

4. Look for 'Enable UPnP port mapping' uncheck this also.

5. Look for 'Add utorrent to Windows Firewall exceptions'.
uncheck this too…

6. Now go to –>Bandwidth

7. Look for 'Global Maximum upload rate' set the value to 20.

8. Look for 'Global Maximum Number of Connections' and
set it to 150. (Don't set this too high may cause speed slowdown)

9. Look 'Maximum Number of connected peers per torrent' and
  set this to 75.

10. Look for 'Number of upload slots per torrent' and
  this set to 50.

11. Check this: 'Use additional upload slots if upload speed <90%'

12. Now Go to ->Queuing

13. Look for 'Maximum number of active torrents'
  set this to 3.

14. Also set 'Maximum number of active downloads' to 3.
  This means at once there may be at least 3 files are downloading.
  (Don't increase more than this)

15. Now go to ->BitTorrnet

16. Check following options:

'Enable DHT Network'
  'Enable DHT for new torrents'
  'Enable Local Peer Discovery'
  'Enable Peer Exchange'

17. Uncheck 'Ask Tracker for scrap information'

That's all now check by adding new torrents to your utorrent downloader...

FINAL & IMPORTANT:

ALWAYS TRY TO COPY TRACKERS FROM EVERY .torrent FILE AND KEEP THAT IN TO ONE .txt FILE. WHENEVER YOU ADD ANY FILE COPY THAT TRACKERS AND PASTE WITH NEW TRACKERS WITHOUT DELETING NEW TRACKERS...

By this method you always get broad chances to obtain more availability of any file you are downloading.

Boost Page Rank by generating META TAGS

Meta tags What it is?

Meta tags, these are the descriptive keywords or list of keywords written in HTML or Xml code and are used for providing the fundamental short information about the structured description of the site-page (in case of a blogger, it is post content).
Such meta tags are generally kept between HEAD section.

The meta tag is represented by the combination of post content, labels (say keywords), title of the post and some portion or say a short theory of the post.

Why meta tag?

Considering that of the meta tags which describe the blog content and also every post in short note, any search engine will easily get the actual and accurate information of your site or blog.

Have you noticed that, for example, in Google search engine, when any query (keyword) is given to it, it not only searches that keyword but also the link, title of that page and some description too.

Yes! now you got my point. That is meta tag.

+BOOST POINTS
Meta tag also helps the engine to find some part of post, which causes the more traffic to your post directly from any search engine.

How to build the meta tag for bog?

Before go further, one point should be noted that, whenever you go to write the meta tag, make sure that the description should be actual high quality descriptive content, don't make redundant data (repetitive data) to get boosted into search engines. Always try to provide correct information, which accurately describe the particular page about which the meta tag is being build.

ADDING AND CREATING META TAG FOR YOUR SITE/BLOG/BLOG-POSTS

1. Go to your template HTML editor.
2. Don’t Check ‘Expand Widgets Templates’.
3. Find

<b:include data='blog' name='all-head-content'/>

If this line not found, find <head> and paste the following genarated meta tag exactly below <head>
4. Consider the following lines:

<b:if cond='data:blog.url == "YOUR-SITE-URL"'>
<TITLE>YOUR-TITLE</TITLE>
<META CONTENT='YOUR-DESCRIPTION' NAME='Description'/>
<META CONTENT='YOUR-STE-OR-POST-KEYWORDS' NAME='Keywords'/>
<META CONTENT='AUTHOR-NAME-OF-SITE-OR-BLOG' NAME='Author'/>
<META CONTENT='YOUR-CONTENT-LANGUAGE' NAME='Language'/>
<META CONTENT='Select All to crawl contents easily' NAME='Robots'/>
</b:if>

5. In above code pattern you have to Just change the colored lines with your data.

Detail explanation with example:
(All fields are required for working meta tag)
YOUR-SITE-URL (Enter the URL of the blog post with http://)
Example :
<b:if cond='data:blog.url == "http://problogbooster.blogspot.com/"'>

YOUR-TITLE (Maximum 100 Characters)
Example :
<TITLE>ProBlogBooster</TITLE>

YOUR-DESCRIPTION (Maximum 250 Characters)
Example :
<META CONTENT='This blog is for getting the better than best stuff with tested funda for blog beginners and old master as well.This blog contains all new,latest,updated and working blogging, computer,windows,internet tricks.Find your solution by browsing the site.' NAME='Description'/>

YOUR-STE-OR-POST-KEYWORDS (Maximum 15 keywords separated by comma)
Example :
<META CONTENT='BLOG BOOST, COMPUTER BOOST, INTERNET BOOST, MY STUFF' NAME='Keywords'/>

AUTHOR-NAME-OF-SITE-OR-BLOG (Author of the post)
Example :
<META CONTENT='Vinayak' NAME='Author'/>

YOUR-CONTENT-LANGUAGE (Language of the post description)
Example :
<META CONTENT='English' NAME='Language'/>

Robots (Select All to crawl contents easily)
Example :
<META CONTENT='All' NAME='Robots'/>

At the end, add </b:if> (Must)

Finally, the meta tags look like as shown below :

<b:if cond='data:blog.url == "http://problogbooster.blogspot.com/"'>
<TITLE>ProBlogBooster</TITLE>
<META CONTENT='This blog is for getting the better than best stuff with tested funda for blog beginners and old master as well.This blog contains all new,latest,updated and working blogging, computer,windows,internet tricks.Find your solution by browsing the site.' NAME='Description'/>
<META CONTENT='BLOG BOOST, COMPUTER BOOST, INTERNET BOOST, MY STUFF' NAME='Keywords'/>
<META CONTENT='Vinayak' NAME='Author'/>
<META CONTENT='English' NAME='Language'/>
<META CONTENT='All' NAME='Robots'/>
</b:if>

(this sample is of ProBlogBooster)

Building the meta tag for the particular post or site is very easy part, but in case the blog or site contains so much of posts or pages then it will becomes more lengthy work to do.

So I have made

Meta Tag Generator

to build a perfect meta tag for your blog or site.

NOTE: Once you add this meta tag to your pages, it may take some time for changes to appear in the index and for crawling entire website.

FINAL WORDS:
The meta tags are really helpful to bring more traffic to your site within a shorter period of time & gets much improved Page Rank.

How to Make Any Add-on Compatible To Any Firefox

Whenever you update the Firefox, most of the time there is chance of occurrence of incompatibility of any of your favorite add-on. Learn how to solve this issue and how to edit addon code in as simple as like writing a letter.

Make Any Add-on Compatible To Any Firefox

In Firefox category, you also need to read an article about how to make Firefox speed double. Meanwhile first and only once you have to understand how the compatibility code is written in its markup for any add-on. And it is very simple to understand. Learn advanced tutorials about coding and building compatibility of Firefox addons.

How to make any addon compatible

First get the add-on file like add-on-name.xpi
Rename it to add-on-name.zip
Open it with zip
Look for install.rdf
Open it with WordPad. (In case if it is not open in WordPad, extract it and then open it with WordPad)
Now you will notice that: (Sometimes this differ but the following red lines must occur)
<?xml version="1.0"?>
<RDF xmlns="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
xmlns:em="http://www.mozilla.org/2004/em-rdf#">
<Description about="urn:mozilla:install-manifest">
<em:id>sample@sample.com</em:id>
<em:version>1.0</em:version>
<em:type>2</em:type>

<em:targetApplication>
<Description>
<em:id>{ec8030f7-c20a-464f-9b0e-13a3a9e97384}</em:id>
<em:minVersion>1.5</em:minVersion>
<em:maxVersion>1.5</em:maxVersion>
</Description>
</em:targetApplication>

<em:name>Addon Name</em:name>
<em:description>A sample extension.</em:description>
<em:creator>Addon Author Name</em:creator>
<em:homepageURL>http://www.AddonHomePage.com/</em:homepageURL>
</Description>
</RDF>
Now concentrate only two lines written in red colour; here is the hack,
<em:minVersion>1.5</em:minVersion>
<em:maxVersion>2.5</em:maxVersion>
These two lines defines that,
Minimum compatibility version is 1.5
And
Maximum compatibility version is 2.5.
Now in order to make it compatible, we have to just change these two parameters.
e.g. If I want to make add-on like above to compatible with version 3.0.0 to 3.5.3 then replace above lines with following
<em:minVersion>3.0.0</em:minVersion>
<em:maxVersion>3.5.3</em:maxVersion>
Now save the install.rdf.
Again rename it to add-on-name.xpi

Now, your incompatible add-on is get compatible with your choice of Firefox version.

NOTE: The percentage of success of this hack is 99.99%. This is because even though some add-on gets compatible with updates of Firefox versions, but they will not works fully.

FINAL WORDS

You may put your comments over here, so others get trust on this. And if you not getting this hack, you may tell here, I will make it compatible for you and send to you. But I want that you people try this yourself, its so simple, else I am here for you.

Open Programs Through RUN Commands [All Run Command List]

In most of the cases, some programs like Add/Remove Programs Utility, MS-Word or anything else are open up by going over to start menu hierarchy, this may time consuming. To reduce this, by the time, use following commands.

Last post was about one of the best windows tips for solving the problem of folder option missing. Today we are going to see huge list of run commands and its apps. A windows run commands are very simple, simply its a command name of actual file used to execute the particular application or software. These commands are mostly used to access a particular program more quickly.

A huge collection of all run commands

PROGRAMS		RUN COMMANDS
Accessibility Controls		access.cpl
Accessibility Wizard		accwiz
Add Hardware Wizard		hdwwiz.cpl
Add/Remove Programs		appwiz.cpl
Administrative Tools		control admintools
Adobe Acrobat (if installed)		acrobat
Adobe Designer (if installed)		acrodesig
Adobe Distiller (if installed)		acrodist
Adobe ImageReady (if installed)		imageready
Adobe Photoshop (if installed)		photoshop
Automatic Updates		wuaucpl.cpl
Bluetooth Transfer Wizard		fsquirt
Calculator		calc
Certificate Manager		certmgr.msc
Character Map		charmap
Check Disk Utility		chkdsk
Clipboard Viewer		clipbrd
Command Prompt		cmd
Component Services		dcomcnfg
Computer Management		compmgmt.msc
Control Panel		control
Date and Time Properties		timedate.cpl
DDE Shares		ddeshare
Device Manager		devmgmt.msc
Direct X Control Panel (If Installed)*		directx.cpl
Direct X Troubleshooter		dxdiag
Disk Cleanup Utility		cleanmgr
Disk Defragment		dfrg.msc
Disk Management		diskmgmt.msc
Disk Partition Manager		diskpart
Display Properties		control desktop
Display Properties		desk.cpl
Display Properties (w/Appearance Tab Preselected)		control color
Dr. Watson System Troubleshooting Utility		drwtsn32
Driver Verifier Utility		verifier
Event Viewer		eventvwr.msc
Files and Settings Transfer Tool		migwiz
File Signature Verification Tool		sigverif
Findfast		findfast.cpl
Firefox (if installed)		firefox
Folders Properties		control folders
Fonts		control fonts
Fonts Folder		fonts
Free Cell Card Game		freecell
Game Controllers		joy.cpl
Group Policy Editor (XP Prof)		gpedit.msc
Hearts Card Game		mshearts
Help and Support		helpctr
HyperTerminal		hypertrm
Iexpress Wizard		iexpress
Indexing Service		ciadv.msc
Internet Connection Wizard		icwconn1
Internet Explorer		iexplore
Internet Properties		inetcpl.cpl
Internet Setup Wizard		inetwiz
IP Configuration (Display Connection Configuration)		ipconfig /all
IP Configuration (Display DNS Cache Contents)		ipconfig /displaydns
IP Configuration (Delete DNS Cache Contents)		ipconfig /flushdns
IP Configuration (Release All Connections)		ipconfig /release
IP Configuration (Renew All Connections)		ipconfig /renew
IP Configuration (Refreshes DHCP & Re-Registers DNS)		ipconfig /registerdns
IP Configuration (Display DHCP Class ID)		ipconfig /showclassid
IP Configuration (Modifies DHCP Class ID)		ipconfig /setclassid
Java Control Panel (If Installed)		jpicpl32.cpl
Java Control Panel (If Installed)		javaws
Keyboard Properties		control keyboard
Local Security Settings		secpol.msc
Local Users and Groups		lusrmgr.msc
Logs You Out Of Windows		logoff
Malicious Software Removal Tool		mrt
Microsoft Access (if installed)		msaccess
Microsoft Chat		winchat
Microsoft Excel (if installed)		excel
Microsoft Frontpage (if installed)		frontpg
Microsoft Movie Maker		moviemk
Microsoft Outlook		outlook
Microsoft Paint		mspaint
Microsoft Powerpoint (if installed)		powerpnt
Microsoft Word (if installed)		winword
Microsoft Syncronization Tool		mobsync
Minesweeper Game		winmine
Mouse Properties		control mouse
Mouse Properties		main.cpl
My Computer		...
Nero (if installed)		nero
Netmeeting		conf
Network Connections		control netconnections
Network Connections		ncpa.cpl
Network Setup Wizard		netsetup.cpl
Notepad		notepad
Nview Desktop Manager (If Installed)		nvtuicpl.cpl
Object Packager		packager
ODBC Data Source Administrator		odbccp32.cpl
On Screen Keyboard		osk
Opens AC3 Filter (If Installed)		ac3filter.cpl
Outlook Express		msimn
Paint		pbrush
Password Properties		password.cpl
Performance Monitor		perfmon.msc
Performance Monitor		perfmon
Phone and Modem Options		telephon.cpl
Phone Dialer		dialer
Pinball Game		pinball
Power Configuration		powercfg.cpl
Printers and Faxes		control printers
Printers Folder		printers
Private Character Editor		eudcedit
Quicktime (If Installed)		QuickTime.cpl
Quicktime Player (if installed)		quicktimeplayer
Real Player (if installed)		realplay
Regional Settings		intl.cpl
Registry Editor		regedit
Registry Editor		regedit32
Remote Access Phonebook		rasphone
Remote Desktop		mstsc
Removable Storage		ntmsmgr.msc
Removable Storage Operator Requests		ntmsoprq.msc
Resultant Set of Policy (XP Prof)		rsop.msc
Scanners and Cameras		sticpl.cpl
Scheduled Tasks		control schedtasks
Security Center		wscui.cpl
Services		services.msc
Shared Folders		fsmgmt.msc
Shuts Down Windows		shutdown
solitaire		sol
Sounds and Audio		mmsys.cpl
Spider Solitare Card Game		spider
SQL Client Configuration		cliconfg
System Configuration Editor		sysedit
System Configuration Utility		msconfig
System File Checker Utility (Scan Immediately)		sfc /scannow
System File Checker Utility (Scan Once At Next Boot)		sfc /scanonce
System File Checker Utility (Scan On Every Boot)		sfc /scanboot
System File Checker Utility (Return to Default Setting)		sfc /revert
System File Checker Utility (Purge File Cache)		sfc /purgecache
System File Checker Utility (Set Cache Size to size x)		sfc /cachesize=x
System Information		msinfo32
System Properties		sysdm.cpl
Task Manager		taskmgr
TCP Tester		tcptest
Telnet Client		telnet
Tweak UI (if installed)		tweakui
User Account Management		nusrmgr.cpl
Utility Manager		utilman
Windows Address Book		wab
Windows Address Book Import Utility		wabmig
Windows Backup Utility (if installed)		ntbackup
Windows Explorer		explorer
Windows Firewall		firewall.cpl
Windows Magnifier		magnify
Windows Management Infrastructure		wmimgmt.msc
Windows Media Player		wmplayer
Windows Messenger		msmsgs
Windows Picture Import Wizard (need camera connected)		wiaacmgr
Windows System Security Tool		syskey
Windows Update Launches		wupdmgr
Windows Version (to show which version of windows)		winver
Windows XP Tour Wizard		tourstart
Wordpad		write

NOTE: (For beginners) In order to open desired program execute associated command by window’s run utility.
For this click on Start -> Run
Place command & hit ENTER.